Home | Register | Arcade | Gallery | Chatroom | Members | Today's Posts | Search | Log In |
|
Notices |
|
Thread Tools |
01-21-2005, 01:43 AM | #1 |
Registered
Join Date: Jan 2005
Location: Gig Harbor, WA
Posts: 3
|
Just tried to load 2.01 and had some problems. Couldn't get the screen saver to come up. The screen would go black with some noise at the bottom and then abort to the desktop. After fooling with this for awhile, finally got it to work by selecting "wide screen" in the setup menu. This works, with black bars at top and bottom. I don't have a wide screen monitor. It will not work if I deselect "wide screen." Any ideas???
|
01-23-2005, 10:39 PM | #2 |
Registered
Join Date: Jan 2005
Location: Gig Harbor, WA
Posts: 3
|
Problem with 2.01
I have version 2 and just tried to load 2.01 and have some problems. I Couldn't get the screen saver to work or come up. The screen would go black with some noise at the bottom and then abort to the desktop. After fooling with this for awhile, finally got it to work by selecting "wide screen" in the setup menu. This works, with black bars at top and bottom. I don't have a wide screen monitor. It will not work if I deselect "wide screen." Any ideas??? I tried removing both 2.0 and 2.01 using wht windows remove program. Loaded 2.01 by itself with the same results. If I deselect "wide screen" it doesn't work. Any ideas???
|
01-24-2005, 12:43 PM | #3 |
Prolific/SereneScreen Developer
Join Date: Mar 2003
Location: Norwalk, CA
Posts: 513
|
What is your system info?
Operating system, DirectX, Video card, and the resolution you are trying to run it at and how many monitors you have. Also if you can run the DXDiag and send me the log result after you tested the Display drivers. A screenshot of the Settings panel would help also in case the anamorphic factor got changed to a bad value. For a normal display, it should be 1.0. Try running it in Window mode and tell me if that works. |
01-24-2005, 09:47 PM | #4 |
Registered
Join Date: Jan 2005
Location: Gig Harbor, WA
Posts: 3
|
I loaded the latest drivers for my video card (intel 82845G) and that didn't fix the problem. I opened the screensave in the windows mode and all I got was a small screen in the corner of my monitor, that couldn't be enlarged. I turned off windows mode and played with the wide screen settings, and all of a sudden it now works in both wide screen and full screen. I'm not sure what was going on, but I'm not going to touch anymore settings and hope it operates normally from now on... Just for you info, I'm running on a pretty much stock Compaq Presario 6000 with 512K RAM and a Pentium IV processor. The video card is as stated above. One more thing. When I started the screen saver to do the above things, it asked for my original CD again. I've put that in serveral times during the upgrade to 2.01 so don't know why it asked for it again...
|
01-24-2005, 11:43 PM | #5 |
Forum Administrator
Join Date: Dec 2000
Location: Rock Hill, SC
Posts: 10,939
|
Glad you got it working as well as you did.
Next time, please go Dell.
"Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell
"If voting changed anything, they'd make it illegal." - Emma Goldman |
|
|
|