Home Register Arcade Gallery Chatroom Members Today's Posts Log In
Go Back   Inside: SereneScreen Fan Forum > SereneScreen Products > Marine Aquarium 3 for Windows
Notices

Reply
 
Thread Tools
Old 09-17-2014, 02:55 AM   #61
marcusgi
Registered
 
Join Date: Jan 2014

Posts: 10
confirming the problem once again

Hi All,

Just wanted to check in to see if anyone has ever gotten a resolution on this problem. Every time I install a windows update I have to re-enter my registration code for MA. I have a hotkey program with the serial number so it's easy, none the less its still a nuisance.
marcusgi is offline   Reply With Quote
Old 09-17-2014, 04:15 PM   #62
harris
Registered
 
Join Date: Feb 2006

Location: Missouri
Posts: 122
Originally posted by marcusgi:
Hi All,

Just wanted to check in to see if anyone has ever gotten a resolution on this problem. Every time I install a windows update I have to re-enter my registration code for MA. I have a hotkey program with the serial number so it's easy, none the less its still a nuisance.  
Nope, nobody have come up with a specific reason for the disappearing serial number , including according to Jim, Prolific who say they can't replicate the problem.

At this point in time a lot of users are just giving up and more or less saying it-is-what-it-is. I am leaning towards it being Windows 8/8.1 update causing the problem. However, I do also believe it is a specific file/program update that is the cause... which one I can't say but in the future I will be watching carefully to see what is updated when the serial number disappears.

At first I suspected the monthly "Malicious Software Removal Tool" update was the culprit, but I downloaded the manual version and did a full scan and it didn't remove the MA3 serial number. My next update possibility is the "Microsoft .Net x.x" updates. I'll be watching to see if MA3 serial number gets removed when a .Net update is installed.

Otherwise, it-is-what-it-is!
harris is offline   Reply With Quote
Old 09-20-2014, 04:14 PM   #63
TimnShaz1
Registered User
 
Join Date: Mar 2014

Posts: 2
As I said in an earlier post, I am no computer guy. I buy one from Best Buy, turn it on and go. That being said, I am not a computer idiot either. So I have been messing around trying to figure out what it is that triggers having to enter your keycode. First thing I did was uninstall MA3 using add/remove programs which was sort of a bummer because it wiped out all of my saved fish lists but so be it. I then downloaded the current version from serenescreen.com. Whether this is the latest version, I don't know. I then installed it as administrator. I then looked and saw that my computer was eligible for updates, a few of them critical so I went ahead and installed them and following the instructions restarted my computer. Everything was fine. Over the course of the next week I would check to see if I needed to reenter my keycode but everything was good. I checked after I had put my computer to sleep, after an automatic update with restart and after just shutting my computer down and restarting it. The bug did not rear it's ugly head and I thought I had it beat. Then today I was just sitting here and thought I'd test it again. So I shut it down (just a regular shutdown without updates), waited ten seconds, powered it back on and voila, needed to enter keycode. I don't think I've ever had to reenter it after a shutdown or restart with updates, but that may be just luck. I can say that this is sooooo irritating. Anything you can do would be great.
TimnShaz1 is offline   Reply With Quote
Old 09-27-2014, 11:14 PM   #64
Jim Sachs
Developer
 
Jim Sachs's Avatar
 
Join Date: Dec 2000

Location: Southern Oregon
Posts: 9,789
TimnShaz1 - thanks for all the effort, but the fact that it just randomly happened after doing all that doesn't really give us much to go on.
Jim Sachs
Creator of SereneScreen Aquarium
Jim Sachs is offline   Reply With Quote
Old 10-02-2014, 01:25 PM   #65
IsoArt
Registered
 
IsoArt's Avatar
 
Join Date: Feb 2009

Posts: 3
I have this same problem as well. Seems to happen on random occasions but usually after restarting Windows 8.1. I wonder if this has something to do with Windows 8.1 Hybrid sleep function? Apparently, Windows 8.1 does not go into a complete shut down when the computer is turned off. It goes into partial Hybrid sleep so the a reboot is faster when turning on the computer. I've noticed this from looking at my uptime counter on Rainmeter where the counter continues on after a power on from my computer. However, the uptime counter will reset to zero on a restart. This is the point where I may need to reenter my key.
IsoArt is offline   Reply With Quote
Old 10-03-2014, 08:38 AM   #66
Jim Sachs
Developer
 
Jim Sachs's Avatar
 
Join Date: Dec 2000

Location: Southern Oregon
Posts: 9,789
What we really need is a reliable way to duplicate this. I'm looking for a repeatable series of steps like:

1. My configuration is (X).
2. I downloaded the latest version of installed MA3.3 and used the Installer while in Administrator mode (not by right-clicking and choosing Install).
3. Every time I do (Y), my Key Code gets erased.
Jim Sachs
Creator of SereneScreen Aquarium
Jim Sachs is offline   Reply With Quote
Old 10-03-2014, 01:19 PM   #67
Nicki
Sugar Plum Fairy
 
Nicki's Avatar
 
Join Date: Dec 2008

Location: Toronto
Posts: 1,267
http://www.bench3.com/2009/11/preven...key-avoid.html

I wonder if this might help as a more permanent workaround?
Run you clever boy. And remember...
Nicki is offline   Reply With Quote
Old 10-03-2014, 02:37 PM   #68
Jim Sachs
Developer
 
Jim Sachs's Avatar
 
Join Date: Dec 2000

Location: Southern Oregon
Posts: 9,789
Interesting, Nicki. I'm not sure it would work in this case, though. From the description, it sounds like the whole Serenescreen registry key would be locked, which means that the program wouldn't be able to make changes in Preferences, etc.
Jim Sachs
Creator of SereneScreen Aquarium
Jim Sachs is offline   Reply With Quote
Old 10-03-2014, 02:52 PM   #69
hillover
Registered
 
Join Date: Apr 2012

Posts: 37
Originally posted by Nicki:
http://www.bench3.com/2009/11/preven...key-avoid.html

I wonder if this might help as a more permanent workaround?  
In my opinion, that would almost always create more problems than it solves.

Jim is right to ask for repeatable test cases. However, his "3. Every time I do (Y), my Key Code gets erased. " appears to not fit the real situation, It appears that the problem happens because of some "external" event, and not something that can be easily done by the user.

IsoArt might have provided a useful clue that someone who is very familiar with the internals of Windows 8.1 could perhaps explore.

Or it may be that everybody who is having this problem (Using Windows 8.1) is also using the same added utility (antivirus or sync tool or browser or ?????).
hillover is offline   Reply With Quote
Old 10-05-2014, 03:10 PM   #70
Nicki
Sugar Plum Fairy
 
Nicki's Avatar
 
Join Date: Dec 2008

Location: Toronto
Posts: 1,267
Darn it all. Yes, I didn't think about that. The whole key would be locked and heaven forbid anyone trying to change it from a different user account than the one used to install it. Comodo Firewall used to offer an option to protect a registry key but doesn't anymore. Maybe that is why, it created more problems than it solved?
Run you clever boy. And remember...
Nicki is offline   Reply With Quote
Old 10-17-2014, 09:56 AM   #71
rhaythorne
Registered
 
Join Date: Oct 2014

Location: London
Posts: 8
Hi all,

For anyone happy to tinker with their Registry settings you might like to try the following to prove/disprove a theory.

I suspect that the problem is likely related to MA3.1 perhaps not working well with Windows' Registry virtualization technology which I shan't bore you with but which you can read more about here:

http://msdn.microsoft.com/en-gb/libr...(v=vs.85).aspx

Using Sysinternals ProcMon utlitiy you can see that entering your Registration Code in MA3.1 creates a number of "RegCode" Registry entries, some within the "VirtualStore" and some within the HKCU (Current User) sections of the Registry.

For reasons I haven't been able to identify, sometimes the VirtualStore entries get re-written with zeros (effectively blanking out the MA3.1 Reg Code) and, as the VirtualStore takes precedence over the "Current User" sections of the Registry, this means that the next time MA3.1 launches, affected users will then be asked to enter their registration codes again.

So, what I'm trying is this:

1. Enter you Registration Code when next asked to do so.
2. Run Regedit and edit the Registry:
(a) Delete all VirtualStore SereneScreen Registry Keys
(b) Note the value of the SereneScreen "RegCode" entries that appear in the HKCU "Current User" sections of the Registry.
(c) Also note the value of the "VersionStr" entry. For the version of MA3 I'm using (MA33JBeta) the value is Y115.3.2.6373
(d) Now, copy the "RegCode" and "VersionStr" entries to the HKLM (Local Machine) secton of the Registry. There should also be a "Version" REG_SZ value here with a value of "3.1".

To summarize, after entering your registration code in MA3.1, delete SereneScreen from the Registry VistualStore. Copy the SereneScreen "RegCode", "VersionStr" and, maybe, "Version" entries from HKCU to HKLM.

Does this work for you?
rhaythorne is offline   Reply With Quote
Old 10-19-2014, 07:19 PM   #72
fly911
Registered
 
fly911's Avatar
 
Join Date: Aug 2013

Location: Florida, USA
Posts: 77
Psychotic behaviour

Jim, I mentioned that I have a 32" HD monitor that runs 24/7/365. The only time it gets turned off is in a power failure. After a week or so of running, I notice fewer and fewer fish. Well tonight I went looking for them. I scrolled all the way to the right. Nothing. Then I scrolled all the way to the left, and lo and behold, there they were, just circling and circling. What do you make of that? See: http://youtu.be/pPstmIImmYY

Mike
fly911 is offline   Reply With Quote
Old 10-20-2014, 01:21 PM   #73
philosopher
Registered
 
philosopher's Avatar
 
Join Date: Jul 2004

Posts: 86
Filter?

Originally posted by fly911:
Jim, I mentioned that I have a 32" HD monitor that runs 24/7/365. The only time it gets turned off is in a power failure. After a week or so of running, I notice fewer and fewer fish. Well tonight I went looking for them. I scrolled all the way to the right. Nothing. Then I scrolled all the way to the left, and lo and behold, there they were, just circling and circling. What do you make of that? See: http://youtu.be/pPstmIImmYY

Mike  
Mike, not that this is helpful - I'm just being a smart-ass here - but I'm pretty certain your fish are stuck in the filter!
Sincerely,

S. Justin Gengo
"Out of chaos comes order."
Nietzsche
philosopher is offline   Reply With Quote
Old 10-20-2014, 02:24 PM   #74
hillover
Registered
 
Join Date: Apr 2012

Posts: 37
Originally posted by fly911:
Jim, I mentioned that I have a 32" HD monitor that runs 24/7/365. The only time it gets turned off is in a power failure. After a week or so of running, I notice fewer and fewer fish. Well tonight I went looking for them. I scrolled all the way to the right. Nothing. Then I scrolled all the way to the left, and lo and behold, there they were, just circling and circling. What do you make of that? See: http://youtu.be/pPstmIImmYY

Mike  
Very entertaining, and an example of what is often referred to as "rounding error" or "precision failure".

It's a bug. Jim will have to sort out where it occurs and find a fix.

Not uncommon in financial software - and results in calculations that are "off by one cent". In this case, my guess is that the "problem" is that the horizontal position in the tank is not exactly representable in 32 bits (or whatever precision is being used). Over time, and millions of calculations, some error accumulates.

That's the general idea. I'm confident that Jim can easily fix the bug.
hillover is offline   Reply With Quote
Old 10-20-2014, 06:56 PM   #75
fly911
Registered
 
fly911's Avatar
 
Join Date: Aug 2013

Location: Florida, USA
Posts: 77
Stuck in the filter.... Good one. When they disappear, I usually just hit "esc" on the keyboard and then click on the Marine Aquarium shortcut on my desktop and I'm back in business.
fly911 is offline   Reply With Quote
Old 10-22-2014, 04:14 AM   #76
patscarr
Pet Shark
 
patscarr's Avatar
 
Join Date: Nov 2001
1 Highscore

Location: Back in Buffalo
Posts: 5,455
That is fascinating! We've never seen that before on this forum. I can't wait to read Jim's explanation.
Patrick
patscarr is offline   Reply With Quote
Old 10-22-2014, 11:59 PM   #77
Jim Sachs
Developer
 
Jim Sachs's Avatar
 
Join Date: Dec 2000

Location: Southern Oregon
Posts: 9,789
It's news to me. I've let the program run for quite a few days, and never noticed it happening. I'll look into it.
Jim Sachs
Creator of SereneScreen Aquarium
Jim Sachs is offline   Reply With Quote
Old 10-30-2014, 03:56 AM   #78
fly911
Registered
 
fly911's Avatar
 
Join Date: Aug 2013

Location: Florida, USA
Posts: 77
I posted the recent video on 10-20-14. It is now 10-30-14. Ten days have elapsed since the fish swirl in the video and now it is doing it again. So whatever the issue is, it has about a ten day repeat. I mean they seem happy enough.
fly911 is offline   Reply With Quote
Old 10-30-2014, 08:10 AM   #79
Ralph
Retired
 
Ralph's Avatar
 
Join Date: Jan 2002
1 Highscore

Location: Edmonton Alberta Ca
Posts: 2,441
A lot of programs have code to phone home. I think the SS fish may have a genetic go home gene, much like Pacific salmon. Or, there may be a hole in the virtual glass that contains the aquarium and the fish eventually find it and escape to freedom.. only to get trapped in a vortex.

Ludwig Wittgenstein (1889 – 1951)
The limits of my language are the limits of my mind. All I know is what I have words for.
Ralph is offline   Reply With Quote
Old 10-30-2014, 12:59 PM   #80
cjmaddy
Registered
 
cjmaddy's Avatar
 
Join Date: Nov 2001

Location: Lancashire, UK
Posts: 7,854
This has been going on long enough!.....

It's not April 1st yet is it?
cjmaddy is offline   Reply With Quote
Reply
Go Back   Inside: SereneScreen Fan Forum > SereneScreen Products > Marine Aquarium 3 for Windows




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -6. The time now is 02:29 AM.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.