GF2 problem

Iwantfish2 · 11-10-2011, 04:06 AM

It's not really a major problem. But it still bugging me. In the petrified wood tank. The piece of wood, the largest off to the right. That little dark spot on the upper left hand side has a little white speck on it. Now I was pretty worried because I though I had a dead or stuck pixel. That wasn't the case. I have had laptops and LCD screens with stuck or dead pixels. I checked and that was not the problem.

It seems like the petrified wood model in that tank is missing a pixel or part of the "skin" it is very small part. But still it is an annoyance a tad bit and I keep noticing it. It looks like the wireframe is coming though the model. I have a pic and will post so you can see. Also for some reason why when I take a screen shot with fraps GF2 has a blue darkish tint to it. MA3 looks fine. This also happens with sharks 2.

I want to know does anyone else have the same problem or is just my laptop? If so can it be fixed with an reinstall or was it just something that has to be fixed in an update?

Check the pic

The red circle shows where the problem is. In the screen saver that spot is a bright white. Like I said it looks like the wire framing isn't covered up.

My specs

Windows 7 Home Premium 64 bit SP1

CPU AMD V140 2.30 Gig

Ram 2 gig

Video AMD M880G with ATI Mobility Radeon HD 4250 256 meg

My resolution is 1366x768. I run the screen savers in the same res and I use widescreen mode. Incase this is useful.

patscarr · 11-10-2011, 06:04 AM

I can see it too. It looks like a dead pixel, but it's not.

Iwantfish2 · 11-10-2011, 07:04 PM

Originally posted by patscarr:

I can see it too. It looks like a dead pixel, but it's not.

I take it you mean you can see it on your screensaver as well. Dead pixel or stuck pixels worry me because I have never been able to fix a stuck pixel. Though I have heard you can. But my laptop has a 2 year warranty. It is probably 1 year now though.

Also thanks for answering

Ralph · 11-10-2011, 09:51 PM

If.. it is a dead pixel then should it not show in every program or wall paper? Pick a black wall paper.. the pixel should show if the screen is defective.

Iwantfish2 · 11-10-2011, 09:55 PM

Nope its just with the screensaver. ^

Jim Sachs · 11-10-2011, 11:28 PM

It's simply a 1-pixel hole in the Alpha channel of the image. Very difficult to find them all when you're doing the original artwork. This one's Eric's, but it took a couple of years for me to fix all the holes that people reported in Marine Aquarium.

Iwantfish2 · 11-11-2011, 12:01 AM

Thanks for the explanation.

^

11-10-2011, 04:06 AM	#1
Iwantfish2 Registered Join Date: Oct 2009 Posts: 13	GF2 problem It's not really a major problem. But it still bugging me. In the petrified wood tank. The piece of wood, the largest off to the right. That little dark spot on the upper left hand side has a little white speck on it. Now I was pretty worried because I though I had a dead or stuck pixel. That wasn't the case. I have had laptops and LCD screens with stuck or dead pixels. I checked and that was not the problem. It seems like the petrified wood model in that tank is missing a pixel or part of the "skin" it is very small part. But still it is an annoyance a tad bit and I keep noticing it. It looks like the wireframe is coming though the model. I have a pic and will post so you can see. Also for some reason why when I take a screen shot with fraps GF2 has a blue darkish tint to it. MA3 looks fine. This also happens with sharks 2. I want to know does anyone else have the same problem or is just my laptop? If so can it be fixed with an reinstall or was it just something that has to be fixed in an update? Check the pic The red circle shows where the problem is. In the screen saver that spot is a bright white. Like I said it looks like the wire framing isn't covered up. My specs Windows 7 Home Premium 64 bit SP1 CPU AMD V140 2.30 Gig Ram 2 gig Video AMD M880G with ATI Mobility Radeon HD 4250 256 meg My resolution is 1366x768. I run the screen savers in the same res and I use widescreen mode. Incase this is useful. Last edited by Iwantfish2; 11-10-2011 at 07:05 PM.

11-10-2011, 06:04 AM	#2
patscarr Pet Shark Join Date: Nov 2001 Location: Back in Buffalo Posts: 5,455	I can see it too. It looks like a dead pixel, but it's not. Patrick

11-10-2011, 09:51 PM	#4
Ralph Retired Join Date: Jan 2002 Location: Edmonton Alberta Ca Posts: 2,443	If.. it is a dead pixel then should it not show in every program or wall paper? Pick a black wall paper.. the pixel should show if the screen is defective. Last edited by Ralph; 11-11-2011 at 11:21 AM. Reason: Corrected really poor English

11-10-2011, 11:28 PM	#6
Jim Sachs Developer Join Date: Dec 2000 Location: Southern Oregon Posts: 9,791	It's simply a 1-pixel hole in the Alpha channel of the image. Very difficult to find them all when you're doing the original artwork. This one's Eric's, but it took a couple of years for me to fix all the holes that people reported in Marine Aquarium. Jim Sachs Creator of SereneScreen Aquarium

11-10-2011, 07:04 PM	#3
Iwantfish2 Registered Join Date: Oct 2009 Posts: 13	Originally posted by patscarr: I can see it too. It looks like a dead pixel, but it's not. I take it you mean you can see it on your screensaver as well. Dead pixel or stuck pixels worry me because I have never been able to fix a stuck pixel. Though I have heard you can. But my laptop has a 2 year warranty. It is probably 1 year now though. Also thanks for answering

11-10-2011, 09:55 PM	#5
Iwantfish2 Registered Join Date: Oct 2009 Posts: 13	Nope its just with the screensaver. ^

11-11-2011, 12:01 AM	#7
Iwantfish2 Registered Join Date: Oct 2009 Posts: 13	Thanks for the explanation. ^